Table of Contents
Advertisement
Nortel Networks Proprietary PPP Worksheet
Requested Information
Enter Remote Address
selection [3]:
Frame Relay Worksheet
Requested Information
Enter Management type [3]:
Enter addressing type [4]:
Enter address field length [2]:
Enter DLCI number [30]:
(For DLCMI None, LMI Switch, Annex
D Switch, and Annex A Switch only)
114200-E Rev 00
Using Local Boot (the Quick-Start Procedure)
(continued)
Options
1. DCE
2. DTE
3. EXPLICIT
Note: Reverse local and remote
address values when configuring
the device at the other end of the
circuit. (Exception: When
connecting to a Series 5 router
that uses DCE/DTE addressing,
use the SAME local address
value.)
Options
1. DLCMI None
2. Rev 1 LMI
3. ANSI T1 617D
4. CCITT Annex A
5. LMI Switch
6. Annex D Switch
7. Annex A Switch
1. ADDR Q.921
2. ADDR Q.922 (MARCH '90)
3. ADDR Q.922 (NOVEMBER
'90)
4. ADDR Q.922
2. Two Bytes
3. Three Bytes
4. Four Bytes
Enter the permanent virtual
channel (PVC) number.
Note: The valid range for the DLCI
number is between 16 and 1007.
Your Response
Your Response
B-13
Advertisement
Table of Contents
