Table of Contents
Advertisement
Verifying Site Requirements
The installation site must provide a certain amount of free space around the ARN
to dissipate heat, as detailed in
Table 1-1.
Width
22.5 in. (57.2 cm)
In addition, the installation site must meet the electrical and environmental
specifications listed in Appendix C.
Caution: You must use grounded electrical power outlets with the ARN.
Installing the ARN
When you are ready to install the ARN in its final location, you have two options:
•
•
Positioning the ARN on a Flat Surface
When positioning the ARN on a flat surface, make sure that the surface is:
•
•
You should place the self-adhesive, rubber feet (shipped with the ARN) on the
bottom of the ARN chassis. These feet not only protect the surface on which you
position the ARN, they provide added friction against the weight of any cables
that you attach to the device.
114200-E Rev 00
Installation Space Requirements
Position the ARN on a flat, sturdy, horizontal surface.
Mount the ARN in an electronic enclosure rack.
Large enough for the ARN to operate properly
Sturdy enough to support the combined weight of the ARN and any cables
that you connect
Table
1-1.
Depth (minimum)
15 in. (38.1 cm)
Installing the ARN
Depth (for servicing)
25 in. (63.5 cm)
(Table 1-1)
1-5
Advertisement
Table of Contents
