Turning On The Printer; Configuring Initial Settings On The Operator Panel - Dell H815DW User Manual

Turning on the Printer

WARNING:
Do not use extension cords or power strips.
WARNING:
The printer should not be connected to an Uninterruptible Power Supply (UPS) system.
NOTE:
The Software and Documentation disc also contains video instructions. In the main menu window of Dell Printer Easy
Install, click Installation Video.
1 Connect the power cable to the power connector on the rear of the printer, and then to a power source.
2 Turn on the printer.

Configuring Initial Settings on the Operator Panel

You need to set the printer language, country, clock date, time, and fax settings when you turn on the printer for the
first time.
When you turn the printer on, the wizard screen to perform the initial setup appears on the touch panel. Follow the
steps below to set the initial settings.
NOTE:
If you do not start configuring the initial settings, the printer automatically restarts in 3 minutes, and the Home screen
appears on the touch panel. After that, you can set the following initial setup by enabling
panel or Dell Printer Configuration Web Tool if needed.
For more information on operator panel, see "Operator Panel."
For more information on Dell Printer Configuration Web Tool, see "Dell™ Printer Configuration Web Tool."
1 The Select Your Language screen appears.
Tap until desired language appears, and then tap the desired language.
a
English
Français
Italiano
Deutsch
Español
58
Connecting and Setting Up Your Printer
on the touch
Power on Wizard