Dell H815DW User Manual page 223

Reset Fusing Unit
Purpose:
To initialize the life counter of the fusing unit. After replacing the fusing unit, be sure to initialize its life counter.
Clear Stored Jobs
NOTE:
Clear Stored Jobs feature is available only when
Purpose:
To clear all files stored as Secure Print, Private Mail Box Print, Public Mail box Print, Proof Print, and Stored Print in
the RAM disk.
Values:
All
Secure Document
Stored Document
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
CAUTION:
Using a non-Dell™ toner cartridge may severely damage your printer. The warranty does not cover damages
caused by using non-Dell toner cartridges.
Values:
*
Off
On
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are
performed by specifying the altitude of the location where the printer is being used.
NOTE:
An incorrect altitude setting leads to poor printing quality, incorrect indication of remaining toner, etc.
Values:
*
0m
1000m
2000m
3000m
RAM Disk
Clear
Deletes all files stored as Secure Print, Private Mail Box Print, Public Mail Box Print,
and Proof Print in the RAM disk.
Clear
Deletes all files stored as Secure Print in the RAM disk.
Clear Deletes all files stored as Stored Print in the RAM disk.
Does not use toner cartridge of another manufacturer.
Uses toner cartridge of another manufacturer.
Sets the altitude of the location where the printer is installed.
is set to .
On
Understanding the Printer Menus
223