Replacing The Fusing Unit, The Transfer Unit, And The Retard Roller - Dell H815DW User Manual

Hide thumbs Also See for H815DW:

Table of Contents

Replacing the Fusing Unit, the Transfer Unit, and the Retard Roller

You need to replace all three parts (the fusing unit, transfer unit, and retard roller) at a time. Both the transfer unit

and the retard roller for replacement come with a new fusing unit.

Before performing any of the following procedures, read and follow the safety instructions in the

Removing the Fusing Unit

1 Turn off the printer, and wait for 40 minutes.

2 Pull the rear cover handle to open the rear cover.

3 Raise the two gray levers on the both sides of the fusing unit to unlock.

4 Grasp the grips on both sides of the fusing unit, and then pull out the unit.

Maintaining Your Printer

Table of Contents