Hex Dump
Purpose:
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in
hexadecimal and character representation. Control codes are not executed.
Values:
*
Disable
Enable
Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when printing in the draft mode.
Values:
*
Disable
Enable
Line Termination
Purpose:
To add the line termination commands.
Values:
*
Off
The line termination command is not added.
CR=CR, LF=LF, FF=FF
Add-LF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
Add-CR
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
CR-XX
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Ignore Form Feed
Purpose:
To specify whether to ignore blank pages that only contain Form Feed control codes.
Values:
*
Off
On
190
Understanding the Printer Menus
Disables the Hex Dump feature.
Enables the Hex Dump feature.
Does not print in the draft mode.
Prints in the draft mode.
Disables the Ignore Form Feed feature.
Enables the Ignore Form Feed feature.