Dell H815DW User Manual page 222

Alignment Chart Print
Clean Developer
Purpose:
To stir the developer in the drum cartridge.
Values:
Start Stirs the developer in the drum cartridge.
Clean Transfer Unit
Purpose:
To clean the transfer unit.
Values:
Start Cleans the transfer unit.
Toner Refresh
Purpose:
To clean the toner in the drum cartridge (and supply new toner from toner cartridge).
NOTE:
Toner Refresh feature uses the toner, and shorten the life of the toner cartridge and the drum cartridge.
Values:
Start Cleans the toner.
Reset Defaults
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu
parameters are reset to their default values.
Values:
User Fax Section
User Scan Section
User Account Section
User App Section
System Section
Initialize Print Meter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero.
Reset Transfer Belt Unit
Purpose:
To initialize the life counter of the transfer belt unit. After replacing the transfer belt unit, be sure to initialize its life
counter.
222
Understanding the Printer Menus
Prints a chart to check for proper alignment of the print image on the
paper.
Initialize Initializes the fax number entries in the Address Book.
Initialize Initializes the e-mail and server address entries in the Address Book.
Initialize Initializes the user registration information.
Initialize Initializes the widget application information.
Initialize Initializes the system parameters.