Dell H815DW User Manual page 158

Bonjour (mDNS)
Purpose:
To configure the detailed settings of Bonjour.
Values:
Host Name Sets the host name up to 63 alphanumeric characters and "-" (dash).
Printer Name Sets the printer name up to 63 alphanumeric characters and symbol sets.
Wide-Area Bonjour Select the check box to enable the Wide-Area Bonjour protocol.
SNMP
Purpose:
To configure the detailed settings of SNMP.
Values:
SNMP Configuration Enable SNMP v1/v2c
Protocol
Edit SNMP v1/v2c
Properties
Enable SNMP v3
Protocol
Edit SNMP v3
Properties
SNMP v1/v2c
Purpose:
To edit the detailed settings of SNMP v1/v2c protocol.
To enter this page, click Edit SNMP v1/v2c Properties in the SNMP page.
Values:
Community Name Community Name
(Read only)
Re-enter Community
Name (Read only)
Community Name
(Read/Write)
Re-enter Community
Name (Read/Write)
Community Name
(Trap)
Re-enter Community
Name (Trap)
158
Dell™ Printer Configuration Web Tool
Select the check box to enable the SNMP v1/v2c protocol.
Click to display the SNMP v1/v2c page and to edit the setting of SNMP
v1/v2c protocol from the page.
Select the check box to enable the SNMP v3 protocol.
Click to display the SNMP v3 page and to edit the setting of SNMP v3
protocol from the page.
You can click this item only when SSL/TLS communication is enabled.
Sets the community name to access (read only) data using up to 31
*1
alphanumeric characters.
The default Read Community is public.
Enters the community name to access (read only) data again to confirm it.
*1
Sets the community name to access (read and write) data using up to 31
*1
alphanumeric characters.
The default Read/Write Community is private.
Enters the community name to access (read and write) data again to
*1
confirm it.
Sets the community name used for trap up to 31 alphanumeric characters.
*1
The default Trap Community is " " (NULL).
Enters the community name used for trap again to confirm it.
*1