Printing With Wi-Fi Direct - Dell H815DW User Manual

7 Print a test page to verify installation.
Click Start Devices and Printers (Start Control Panel Hardware and Sound Printers for Windows
a
®
Vista and Windows Server
®
For Windows 8, Windows
On the Desktop screen, right-click the bottom left corner of the screen, and then click Control Panel 
Hardware and Sound (Hardware for Windows Server
Printers.
®
10: Right-click the Start button, and then click Control Panel  Hardware and Sound 
For Windows
Devices and Printers.
Right-click the printer you just created, and then click Printer properties (Properties for Windows Vista
b
®
Windows Server
On the General tab, click Print Test Page. When a test page prints successfully, installation is complete.
c

Printing With Wi-Fi Direct

NOTE:
The Wi-Fi Direct feature is available on the Dell Cloud Multifunction Printer | H815dw only.
This section provides information for Wi-Fi Direct printing. Wi-Fi Direct allows your Wi-Fi mobile devices such as
computers, smartphones, and tablets, to connect to the printer directly via a Wi-Fi network. With Wi-Fi Direct, you
can print documents, photos, or e-mail on your Wi-Fi mobile devices directly without a wireless access point.
NOTE:
Wi-Fi Direct is available even if the printer is connected to your wireless network connection.
NOTE:
The maximum number of devices that can be connected via the Wi-Fi Direct network is 3.
NOTE:
You cannot connect your mobile device to the Internet via the printer's Wi-Fi Direct network.
NOTE:
Depending on the mobile device, the channel used to connect the device to the printer via Wi-Fi Direct may differ from
the channel used by the printer to connect to a network via Wi-Fi infrastructure mode. In such a case, simultaneous connection
with Wi-Fi Direct and Wi-Fi infrastructure mode may not work properly.
NOTE:
The printer connected with Wi-Fi Direct supports the following protocols; LPD, Port9100, Web Services on Devices
(WSD), Bonjour (mDNS), SNMPv1/v2c, Dell Printer Configuration Web Tool.
Setting Up Wi-Fi Direct
To use Wi-Fi Direct, you need to first set up the Wi-Fi Direct settings from the operator panel of the printer. To
connect the mobile device to the printer via Wi-Fi Direct, select the SSID of the printer from the list of wireless
networks on the mobile device and enter the passphrase necessary for connection.
Setting Up the Printer
NOTE:
Wi-Fi Direct cannot be used in an IPv6 or Ad-hoc environment.
1 Press the (Information) button.
2 Tap the Tools tab, and then tap Admin Settings.
3 Tap Network.
4 Tap Wi-Fi Direct.
5 In the Wi-Fi Direct menu, tap Wi-Fi Direct.
6 Tap Enable, and then tap OK.
When a popup message about the devices is displayed, tap Close.
7 Tap Group Role.
®
2008).
®
8.1, Windows Server
2008).
®
2012, and Windows Server
® ®
2012/Windows Server
®
2012 R2:
2012 R2)  Devices and
®
and
Printing
293