Dell H815DW User Manual page 198

Ethernet
NOTE:
When the Ethernet cable is connected,
Purpose:
To confirm or specify wired network settings.
IP Mode
Purpose:
To configure the IP mode.
Values:
*
Dual Stack
IPv4 Mode
IPv6 Mode
TCP/IP
Purpose:
To configure TCP/IP settings.
Values:
Get IP Address AutoIP
BOOTP
RARP
DHCP
Panel
IP Address
Subnet Mask
Gateway Address
IPsec
NOTE:
IPsec feature is available only when IPsec is enabled on the Dell Printer Configuration Web Tool.
Purpose:
Disables IPsec.
198
Understanding the Printer Menus
Ethernet
Uses both IPv4 and IPv6 to set the IP address.
Uses IPv4 to set the IP address.
Uses IPv6 to set the IP address.
*
Sets the IP address automatically. The printer will first try to get the IP
address from the DHCP server. If the printer cannot get the IP address, then
the printer uses the link local address. A random value in the range of
169.254.0.0 to 169.254.255.255 that is not currently in use on the network is
set as the IP address. The subnet mask is set as 255.255.0.0.
Sets the IP address using BOOTP.
Sets the IP address using RARP .
Sets the IP address using DHCP .
Use this option when you want to set the IP address manually on the
operator panel.
When an IP address is being set manually, the IP is allocated to the printer
using the format nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 255.
When an IP address is being set manually, the subnet mask is specified using
the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is
a value in the range of 0 to 255.
255.255.255.255 cannot be specified as the subnet mask.
When an IP address is being set manually, the gateway address is specified
using the format nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 255.
127 and any value in the range of 224 to 254 cannot be specified for the first
octet of a gateway address.
is displayed.