7 Enter the new password, and then tap OK.
CAUTION:
Be sure to remember the password. The procedure described below allows you to reset the password, but
the settings for Address Book and Phone Book are cleared.
•
Turn off the printer. Then, while holding the
and 8.
8 Re-enter the password to confirm the password that you entered, and then tap OK.
To change the password while Panel Lock is Enable, perform steps 1 to 4 above, and then tap Change
Password. Perform steps 7 and 8 above to change the password.
Disabling the Panel Lock
1 Press the
(Information) button.
2 Tap the Tools tab, and then tap Admin Settings.
3 Enter the password.
4 Tap
until Secure Settings appears, and then tap Secure Settings.
5 Tap Panel Lock.
6 Tap Panel Lock Control.
7 Tap Disable, and then tap OK.
8 Enter the current password, and then tap OK.
Resetting Defaults
After executing this function and rebooting the printer, the phone book, address book, or menu parameters are reset
to their default values.
The following menu parameters are exceptions and are not reset.
•
Network settings
•
Panel Lock settings and password
•
Functions Control settings (Copy, Scan to E-mail, Fax, Scan to Network Folder, Scan to Computer, PC Scan, Scan
to USB, USB Direct Print) and passwords
•
Secure Receive settings and password
•
Login Error settings
•
Set Available Time settings
•
Secure Job Expiration settings
•
USB Port settings
•
AccessControl Mode settings
•
AccessControl Error Report settings
•
Non Registered User settings
•
NFC Authentication settings
•
Tap to Print settings
(Information) button, turn on the printer. Perform steps 7
Understanding the Printer Menus
261