Network - Dell H815DW User Manual

Network

Use the Network menu to change the printer settings affecting jobs sent to the printer through the wired or
wireless network.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Wi-Fi
NOTE:
The Wi-Fi feature is available on the Dell Cloud Multifunction Printer | H815dw only.
Purpose:
To confirm or specify wireless network settings.
Wi-Fi
Purpose:
To specify whether to enable the Wi-Fi feature.
Values:
Off
On
Wi-Fi Status
Purpose:
To confirm the wireless communication status.
Values:
Status
SSID
Encryption Type
Wi-Fi Setup Wizard
NOTE:
Wi-Fi Setup Wizard is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless network interface.
Values:
Select access point
WEP Key
Passphrase
Manual SSID Setup Enter SSID
194
Understanding the Printer Menus
Disables the Wi-Fi feature.
Enables the Wi-Fi feature.
Good
Acceptable
Low
No Reception
Displays the name that identifies the wireless network.
Displays the encryption type.
Select the access point from the list.
When you select an access point using WEP as the
encryption type, enter the WEP key.
When you select an access point using WPA, WPA2, or
Mixed as the encryption type, enter the passphrase.
Specifies a name to identify the wireless network. Up to 32
alphanumeric characters can be entered.