Dell H815DW User Manual page 200

Bonjour(mDNS)
Telnet
Update Address Book
*1
HTTP-SSL/TLS
Google Cloud Print
Print from Widget Apps
Scan to Widget Apps
*1
This feature is available only when a digital certificate is set from the Dell Printer Configurations Web Tool. This printer supports only
TLS connections.
Advanced Settings
Purpose:
To specify advanced network settings.
IP Filter
NOTE:
IP Filter feature is available only for
Purpose:
To block data received from certain IP addresses through the wired or wireless network. You can set up to five IP
addresses. The change becomes effective after the printer is turned off and then on again.
Values:
n (n is 1-5) IP Address
Subnet Mask
Mode
IEEE 802.1x
NOTE:
IEEE 802.1x feature is available only when the printer is connected using Ethernet cable and it is available only when the
IEEE 802.1x authentication is enabled.
Purpose:
To disable IEEE 802.1x authentication. The change becomes effective after the printer is turned off and then on
again.
200
Understanding the Printer Menus
Disable Disables Bonjour (mDNS).
*
Enable Enables Bonjour (mDNS).
Disable Disables Telnet.
*
Enable Enables Telnet.
Disable Disables Update Address Book.
*
Enable Enables Update Address Book.
*
Disable
Disables HTTP-SSL/TLS.
Enable Enables HTTP-SSL/TLS.
Disable Disables Google Cloud Print.
*
Enable Enables Google Cloud Print.
Disable Disables printing from the widget apps.
*
Enable Enables printing from the widget apps.
Disable Disables scanning to the widget apps.
*
Enable Enables scanning to the widget apps.
LPD Port9100
or
*
Off
Accept
Reject
.
Sets the IP address for Filter n.
Sets the address mask for Filter n.
Disables the IP Filter feature for Filter n.
Accepts an access from the specified IP address.
Rejects an access from the specified IP address.