When Using The Tool Box; Verifying The Ip Settings; Verifying The Settings Using Operator Panel - Dell H815DW User Manual

7 Tap until TCP / IP appears, and then tap TCP / IP.
8 Tap Get IP Address.
9 Tap Panel, and then tap OK.
10 Tap IP Address.
The cursor is located at the first octet of the IP address.
11 Use the number pad to enter the first octet of the IP address, and then tap
The cursor moves to the next digit.
NOTE:
You can only enter one octet at a time and must tap
12 Enter the rest of the octets, and then tap OK.
13 Tap Subnet Mask.
14 Repeat steps 11 and 12 to set Subnet Mask.
15 Tap Gateway Address.
16 Repeat steps 11 and 12 to set Gateway Address.
17 Turn off the printer, and then turn it on again.

When Using the Tool Box

1 Click Start  All Programs  Dell Printers  Dell Printer Hub or Dell Printer Management Tool.
®
10: Click the Start button  Dell Printer Hub or Dell Printer Management Tool.
For Windows
2 For Dell Printer Hub, select the printer from My Printers on the home screen.
For Dell Printer Management Tool, select the printer displayed by default, or another printer from the drop-down
list on the upper-right corner of the home screen.
3 Click the shortcut to the Tool Box on the left of the screen.
The Tool Box opens.
4 Click the Printer Maintenance tab.
5 Select TCP/IP Settings from the list at the left side of the page.
The TCP/IP Settings page appears.
6 Select the mode from IP Address Mode, and then enter the values in IP Address, Subnet Mask, and Gateway
Address.
7 Click Apply New Settings to take effect.
You can also assign the IP address to the printer when installing the printer drivers with the installer. When you use the
Wireless or Ethernet Connection feature, and the Get IP Address is set to AutoIP or DHCP on the printer, you
can set the IP address from 0.0.0.0 to the desired IP address on the printer selection window.

Verifying the IP Settings

You can confirm the settings by using the operator panel, printing the system settings report, or using the ping
command.

Verifying the Settings Using Operator Panel

1 Press the (Information) button.
2 Tap About This MFP .
.
after entering each octet.
Setting the IP Address
81