Jumper Settings - VIA Technologies KT400A User Manual

3-2 Jumper Settings

JCMOS:
Clear CMOS data Jumper
If the CMOS data becomes corrupted or
you forgot the supervisor or user
password, clear the CMOS data to
reconfigure the system back to the
default values stored in the ROM BIOS.
1
To CMOS Clear data, please follow the steps below.
1. Turn off the system.
2. Change the jumper from "1-2" to "2-3" position for
a few seconds.
3. Replace the jumper on to the "1-2" position.
4. Turn on the system and hold down the <Del> key
to enter BIOS setup.
Installation
Settings:
1-2: Normal (Default)
2-3: Clear CMOS
Page 3-5