Table of Contents
Advertisement
3-2 Jumper Settings
JCMOS:
1
To CMOS Clear data, please follow the steps below.
1. Turn off the system.
2. Change the jumper from “1-2” to “2-3” position for
a few seconds.
3. Replace the jumper on to the “1-2” position.
4. Turn on the system and hold down the <Del> key
to enter BIOS setup.
JCK1/
JCK2:
1
1
Note: Overclocking may result to the CPU’s or
system’s instability and are not guaranteed to
provide better system performance.
Installation
Settings:
1-2: Normal (Default)
2-3: Clear CMOS
JCK1 JCK2 Settings:
1-2
1-2
100MHz (Default)
2-3
1-2
133MHz
2-3
2-3
166MHz
Page 3-5
Advertisement
Table of Contents
