Ntp Server; Recordings Storage; Figure 55: Settings->Recordings Storage - Grandstream Networks UCM6100 Series User Manual

NTP SERVER

The UCM6100 can be used as a NTP server for the NTP clients to synchronize their time with. To
configure the UCM6100 as the NTP server, set "Enable NTP server" to "Yes" under web
GUI->Settings->NTP Server. On the client side, point the NTP server address to the UCM6100 IP
address or host name to use the UCM6100 as the NTP server.

RECORDINGS STORAGE

The UCM6100 supports call recordings automatically or manually and the recording files can be saved in
external storage plugged in the UCM6100 or on the UCM6100 locally. To manage the recording storage,
users can go to UCM6100 web GUI->Settings->Recordings Storage page and select whether to store
the recording files in USB Disk, SD card or locally on the UCM6100.

If "Enable Auto Change" is selected, the recording files will be automatically saved in the available
USB Disk or SD card plugged into the UCM6100. If both USB Disk and SD card are plugged in, the
recording files will be always saved in the USB Disk.

If "Local" is selected, the recordings will be stored in UCM6100 internal storage.

If "USB Disk" or "SD Card" is selected, the recordings will be stored in the corresponding plugged in
external storage device. Please note the options "USB Disk" and "SD Card" will be displayed only if
they are plugged into the UCM6100.
Firmware Version 1.0.10.39
Figure 55: Settings->Recordings Storage
UCM6100 Series IP PBX User Manual Page 90 of 331