Table 11: Ucm6108/Ucm6116 Network Settings->Basic Settings - Grandstream Networks UCM6100 Series User Manual

Preferred DNS Server
IP Method
IP Address
Subnet Mask
Gateway IP
DNS Server 1
DNS Server 2
User Name
Password
Layer 2 QoS
802.1Q/VLAN Tag
Layer 2 QoS 802.1p
Priority Value

Method: Route
When the UCM6102 has method set to Route in network settings, WAN port interface is used for
uplink connection and LAN port interface is used as a router. Please see a sample diagram below.
Firmware Version 1.0.10.39
Table 11: UCM6108/UCM6116 Network Settings->Basic Settings
Enter the preferred DNS server address. If Preferred DNS is used, UCM will try to
use it as Primary DNS server.
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
Enter the IP address for static IP settings.
Enter the subnet mask address for static IP settings.
Enter the gateway IP address for static IP settings.
Enter the DNS server 1 address for static IP settings.
Enter the DNS server 2 address for static IP settings.
Enter the user name to connect via PPPoE.
Enter the password to connect via PPPoE.
Assign the VLAN tag of the layer 2 QoS packets for LAN port. The default value is
0.
Assign the priority value of the layer 2 QoS packets for LAN port. The default
value is 0.
UCM6100 Series IP PBX User Manual Page 59 of 331