Figure 47: Ldap Client Configurations - Grandstream Networks UCM6100 Series User Manual

Base DN: dc=pbx,dc=com
User Name: cn= "LDAP server login name", dc=pbx, dc=com [matching LDAP server format]
Password: "LDAP server login password"
Filter: (|(CallerIDName=%)(AccountNumber=%))
Port: 389
The following figure gives a sample configurations for UCM6100 acting as a LDAP client.

Figure 47: LDAP Client Configurations

To configure Grandstream IP phones as the LDAP client, please refer to the following example:
Server Address: The IP address or domain name of the UCM6100
Base DN: dc=pbx,dc=com
User Name: Please leave this field empty
Password: Please leave this field empty
LDAP Name Attribute: CallerIDName Email Department FirstName LastName
LDAP Number Attribute: AccountNumber MobileNumber HomeNumber Fax
LDAP Number Filter: (AccountNumber=%)
LDAP Name Filter: (CallerIDName=%)
LDAP Display Name: AccountNumber CallerIDName
LDAP Version: If existed, please select LDAP Version 3
Port: 389
The following figure shows the configuration information on a Grandstream GXP2200 to successfully use
the LDAP server as configured in .
Figure 37: LDAP Server Configurations
Firmware Version 1.0.10.39 UCM6100 Series IP PBX User Manual Page 81 of 331