Table 23: Create New Office Time; Figure 51: Create New Office Time - Grandstream Networks UCM6100 Series User Manual

Start Time
End Time
Week
Show Advanced Options
Month
Day
Select "Start Time", "End Time" and the day for the "Week" for the office time. The system administrator
can also define month and day of the month as advanced options. Once done, click on "Save" and then
"Apply Change" for the office time to take effect. The office time will be listed in the web page as the figure
shows below.
Firmware Version 1.0.10.39

Figure 51: Create New Office Time

Table 23: Create New Office Time

Configure the start time for office hour.
Configure the end time for office hour
Select the work days in one week.
Check this options to show advanced options. Once selected, please
specify "Month" and "Day" below.
Select the months for office time.
Select the work days in one month.
UCM6100 Series IP PBX User Manual Page 87 of 331