Time Settings; Auto Time Updating; Figure 49: Ucm6100 Email Settings - Grandstream Networks UCM6100 Series User Manual

The following figure shows a sample Email settings on the UCM6100, assuming the Email is using
smtp.gmail.com as the SMTP server.
Once the configuration is finished, click on "Test". In the prompt, fill in a valid Email address to send a test
Email to verify the Email settings on the UCM6100.

TIME SETTINGS

AUTO TIME UPDATING

The current system time on the UCM6100 is displayed on the upper right of the web page. It can also be
found under Web GUI->Status->System Status->General.
To configure the UCM6100 to update time automatically, go to Web GUI->Settings->Time
Settings->Time Auto Updating.
----------------------------------------------------------------------------------------------------------------------------- ---------------
Note:
The configurations under Web GUI->Settings->Time Settings->Time Auto Updating page require
reboot to take effect. Please consider configuring auto time updating related changes when setting up the
UCM6100 for the first time to avoid service interrupt after installation and deployment in production.
----------------------------------------------------------------------------------------------------------------------------- ---------------
Firmware Version 1.0.10.39

Figure 49: UCM6100 Email Settings

UCM6100 Series IP PBX User Manual Page 84 of 331