Administration Page - AMX MAX-CSD ENCODER Instruction Manual

MAX-CSE Web Interface

Administration Page

This (FIG. 13) is the first page displayed in the Active frame after a successful login. It is accessed
by clicking on the Admin link from within the Navigation frame.
Stream Status
and signal
detection
FIG. 13 Administration page
The following table lists the Administration page features that an administrator or other authorized
user can configure. Refer to FIG. 14 as an example.
Administration Page Features
Feature
Administration page:
Apply
Cancel
Microphone icon
Resources:
20
Description
Displays an overview of the MAX firmware and project
information. Also provides the user with the ability to both
start/stop the outgoing A/V stream from the CSE, and directly
upload firmware to the target MAX unit without having to use
NetLinx Studio.
• Allows a user to incorporate/save the current information to the
target MAX unit.
• Cancels the current action and prevents any change to the
previously entered information.
• Toggles the audio state of the incoming microphone signal
between active and muted.
• Displays the version of the currently installed product firmware
in a major.minor.micro format. This field is read-only.
• The displayed firmware is the same as version displayed
adjacent to the MAX entry within NetLinx Studio's Online Tree
tab.
Current Firmware
Description of the
currently streamed
A/V content
Direct Firmware
Upload
MAX Video Encoder