Titan TTB674TAS Instruction Manual page 6

GB TTB674TAS by TITAN
IE
1. Right extension table
2. Saw blade
3. Blade guard apron
4. Rubber foot
5. Stand
6. Height adjusting handle
7. On/Off switch
8. Bevel adjusting handwheel
9. Overload reset switch
10. Bevel locking handle
11. Front rail
12. Mitre gauge
13. Left extension table
14. Blade guard
Safety devices
Blade guard [14] and blade guard apron [3]
Protects against accidental touching of the saw blade and flying chips. The blade
guard and blade guard apron must always be mounted during operation.
Riving knife [24]
Prevents a work piece from being caught by the ascending teeth and being flung
against the operator. The riving kinfe must be mounted during operation.
Push stick [21]
Serves as an extension of the operator's hand and protects against accidental
touching of the saw blade. The push stick must always be used if the distance
between the rip fence and saw blade is less than 12 cm.
06
15. Dust extraction hose
16. Rear extension table
17. Table insert
18. Hose hold
19. Rip fence
20. Push stick hold
21. Push stick
22. Rip fence locking handle
23. Blade wrench
24. Riving knife
25. Working table
26. Supporting bar
27. Dust extraction adapter
Your product