Mitre Gauge - Titan TTB674TAS Instruction Manual

TTB674TAS by TITAN
Fig. 27

Mitre gauge

> The head is locked in the desired position for crosscutting or mitring by tightening
the locking handle.
Always lock it securely when in use.
Adjust the angle of the mitre gauge
The stop profile can be adjusted by a maximum of 60° for mitre cuts.
Warning: Risk of injury!
Do not push the parallel profile [61] too far in the direction of the
saw blade. The distance between the parallel profile and the front
of the saw blade should be approx. 2.5 cm.
Product functions
21
GB
IE
39