Titan TTB674TAS Instruction Manual page 40

TTB674TAS by TITAN
GB
IE
> Loosen the mitre gauge locking handle (62).
> By turning the parallel profile [61], set the desired angle on the scale [63].
> Tighten the mitre gauge locking handle (62).
Fig. 28
BASIC TABLE SAW OPERATIONS
40
Warning: Risk of injury!
If the distance between the rip fence and saw blade is less than
12 cm, the push stick [21] must be used.
Warning: Risk of injury!
Always hold the guided work piece fast, never the free work piece
which has been cut off.
Warning: Product damage!
Check the wood to be worked carefully. The device can be
damaged severely by foreign bodies such as nails, screws, etc.
Warning: Product damage!
Always use sharp saw blades. Blunt blades can overload
and damage the product.
61
62
Product functions
63