Titan TTB674TAS Instruction Manual page 34

TTB674TAS by TITAN
GB
IE
OPERATION CONTROLS
On/Off switch
Switching on:
> To start the machine by pressing the green I-button [59] on the On/Off switch [7].
When turning the switch ON stand on either side of the blade and never in front
of it.
Allow saw blade to reach full speed before cutting.
Switching off:
> To stop the machine by pressing the red 0-Button [60] on the On/Off Switch [7].
Fig. 24
34
Warning: Risk of injury!
Before turning on the switch make sure the blade guard is correctly
installed and operating properly.
9
59
60
7
Product functions