Hex Bolts - Titan TTB674TAS Instruction Manual

GB TTB674TAS by TITAN
IE
To assemble the front rail & rip fence
> Insert the hex bolts M6 x 16 [31] through the holes on the working table, left and
right extension tables, then put the flat washers 6 [28], spring washers 6 [29] and
loosely tighten on the hex nuts M6 [30] as shown in the Fig. 12.
31
Fig. 12
> Push on the front guide rail [11] with slot of the front guide rail aligned with the
six hex nuts M6 [30] as shown in the Fig. 13.
Fig. 13
24
30
29
28
Before you start
11