Titan TTB674TAS Instruction Manual page 47

TTB674TAS by TITAN
Fig. 33
ADJUSTMENT
Adjusting the bevel stops
This saw has positive stops that will quickly position the saw blade at 90° or 45°
to the working table.
The angle settings of the saw have been set at the factory and, unless damaged
in shipping, should not require setting during assembly. After extensive use, it
may need to be checked.
Make adjustments only if necessary.
> Unplug the saw.
> Remove the blade guard.
> Raise the blade to the maximum height by turning the high adjusting
handle counterclockwise.
Product functions
GB
IE
47