Subscribe to Our Youtube Channel
Related Manuals for Titan TTB545SSW
Summary of Contents for Titan TTB545SSW
- Page 1 240W Scroll Saw TTB545SSW Barcode: 5052931253661 WARNING! Read the instructions before using the product!
- Page 2 GUARANTEE This TITAN product carries a 2 year guarantee. If your product develops a fault within this period, you should, in the first instance contact the retailer where the item was purchased.
-
Page 3: Table Of Contents
TTB545SSW by TITAN Let’s get started… These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Your product Technical and legal information Before you start detail... more Product functions... -
Page 4: Your Product
Blade size: 127mm x 2.6mm Working table size: 625mm x 330mm Serial No. Rotary table size: 136 x 180mm Titan Power Tools (UK) Ltd. BA22 8RT 1. On/off switch 11. Storage compartment 21. Rotary tool dust port 2. Switch for LED light 12. -
Page 5: Technical And Legal Information
Technical and legal TTB545SSW by TITAN information Technical specifications General > Input Voltage 230-240V~50Hz > Power Input 240W S6 60% 10min > Saw Blade Speed 400-1600min > Saw Blade Size 127mm x 2.6mm > Max. Cutting Depth 51mm > Max. Cutting Width 457mm >... - Page 6 Technical and legal TTB545SSW by TITAN information The declared vibration emission been measured in accordance with a standardised test stated above and may be used to compare one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure.
-
Page 7: Safety Warnings
Technical and legal TTB545SSW by TITAN information Symbols On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property. - Page 8 Technical and legal TTB545SSW by TITAN information SAVE THESE INSTRUCTIONS 1. Keep the work area clean. > Cluttered and dark areas invite accidents. 2. Consider work area environment. > Do not expose power tools to rain. Do not use power tools in damp or wet locations.
- Page 9 Technical and legal TTB545SSW by TITAN information > Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubrication and changing accessories. Inspect tool cord periodically and if damaged have them replaced by an authorised service facility. Inspect extension cords periodically and replace if damaged.
- Page 10 Technical and legal TTB545SSW by TITAN information You are advised to consider the risks associated with the materials you are working with and to reduce the risk of exposure. You should: - Work in a well-ventilated area. - Work with approved safety equipment, such as those dust masks that are specially designed to filter microscopic particles.
- Page 11 Technical and legal TTB545SSW by TITAN information Bend your knees when lifting the scroll saw. > Carry the scroll saw by its base. Do not move the scroll saw by pulling on the powercord. Pulling on the power cord could cause damage to the insulation or the wire connections resulting in electric shock or fire.
-
Page 12: Before You Start
Before you start TTB545SSW by TITAN Unpack > Unpack all parts and lay them on a flat, stable surface. > Remove all packing materials and shipping devices if applicable. > Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer. - Page 13 Before you start TTB545SSW by TITAN > Insert the bolts 8 x 50mm (30), spring washers M8 (31), rubber feet (32), flat washers (33) and nut (34) into the holes in turns as shown in Fig. 1. > Then tighten the 4 bolts (30) with 12mm spanner (not supplied).
- Page 14 Before you start TTB545SSW by TITAN > Loosen the screw (37) holding the bevel scale pointer and position pointer to 0º. Tighten the screw. > Attach the blade guard foot (6) and tighten the screw (24) with 5mm hex key.
- Page 15 Before you start TTB545SSW by TITAN Fig. 6 Sawdust collection port This scroll saw allows a hose or vacuum accessory (not provided) to be connected to the sawdust port (9) at the front of the saw and to the dust port (21) under the rotary tool table (20), if installed.
-
Page 16: Blade Selection
Before you start TTB545SSW by TITAN Blade selection This scroll saw accepts 5" length pin-end blades, with a wide variety of blade thicknesses and widths. The type of material and intricacies of cutting operations will determine the number of teeth per inch. Always select the narrowest blades for intricate (tight radius and curves) curve cutting and the widest blades for straight and large curve cutting operations. -
Page 17: Blade Care
Before you start TTB545SSW by TITAN Blade Care To maximize the life of your scroll saw blades: > Do not bend blades when installing. > Always set proper blade tension. > Use the right blade (see instructions on replacement blade packaging for proper use.) - Page 18 Before you start TTB545SSW by TITAN > Install a blade: • Hook a blade (25) in the recess of the lower blade holder (22). • Press down on the upper arm (39) and insert the blade into the slot on the upper holder (5).
- Page 19 Before you start TTB545SSW by TITAN Attach the tool to the support bracket Use this procedure to use the rotary tool as a stationary device. > Loosen the knob (43) on the rotary clamp. > Insert the rotary tool (27) through the clamp and the opening in the rotary table (20).
-
Page 20: In More Detail
TTB545SSW by TITAN detail… more Product functions Care and maintenance Trouble shooting Recycling and disposal EC declaration of conformity... -
Page 21: Product Functions
Product functions TTB545SSW by TITAN Recommendations for cutting A scroll saw is basically a curve-cutting machine. It can also be used for straight cutting and beveling or angle cutting operations. Please read and understand the following items before attempting to use the saw. - Page 22 Product functions TTB545SSW by TITAN LED Light switch > To turn on the light, press the light switch (2) to the ON (I) position. > To turn OFF the light, press the light switch (2) to the OFF (O) position.
-
Page 23: Freehand Cutting
Product functions TTB545SSW by TITAN Freehand cutting > Lay out desired design, or secure design to the workpiece. > Raise the blade guard foot (6) by loosening the height adjustment knob (19). > Position the workpiece against the blade and place the blade guard foot against the top surface of the workpiece. - Page 24 Product functions TTB545SSW by TITAN Angle cutting (bevel cutting) > Layout or secure design to workpiece. > Move the blade guard foot to the highest position by loosening the height adjustment knob (19). Retighten. > Tilt the table to the desired angle by loosening the table bevel lock (8) and turning the bevel adjustment knob (26) to move the table to the proper angle using the degree scale and the pointer (46).
- Page 25 Product functions TTB545SSW by TITAN Fig. 20 Rip or straight line cutting > Raise the blade guard foot (6) by loosening the height adjustment knob (19). > Measure from the tip of the blade to the desired distance. Position the straight edge parallel to the blade at that distance.
- Page 26 Product functions TTB545SSW by TITAN > When the cut is complete, move the trailing edge of the workpiece beyond the blade guard foot. Turn the switch OFF. Fig. 21...
-
Page 27: Care And Maintenance
Care and maintenance TTB545SSW by TITAN The golden rules for care WARNING! Always switch the product off, disconnect it from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! > Keep the product clean. Remove debris from it after each use and before storage. - Page 28 Care and maintenance TTB545SSW by TITAN Lubrication Lubricate the arm bearings (one on each side of the saw) after every 50 hours of use. > Turn the saw on its side and remove the rubber bearing cover. > Squirt a generous amount of SAE 20 oil (lightweight motor oil) around the shaft and bearing.
-
Page 29: Power Cord
Care and maintenance TTB545SSW by TITAN Power cord > If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a safety hazard. Plug replacement If you need to replace the fitted plug then follow the instructions below. - Page 30 Care and maintenance TTB545SSW by TITAN NOTE: If a moulded plug is fitted and has to be removed take great care in disposing of the plug and severed cable, it must be destroyed to prevent engaging into a socket. If the supply cord is damaged it must be replaced by a service agent or a similarly qualified person in order to avoid hazard.
-
Page 31: Trouble Shooting
Trouble shooting TTB545SSW by TITAN Trouble shooting Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these... - Page 32 Trouble shooting TTB545SSW by TITAN Problem Possible cause Solution 3. Excessive 3.1 Improper mounting 3.1 See proper mounting Vibration (Some of saw instruction vibration is 3.2 Unsuitable mounting 3.2 Replace plywood inevitable when surface workbench surface the saw and with solid lumber...
-
Page 33: Recycling And Disposal
Recycling and disposal TTB545SSW by TITAN Recycling and disposal > Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. -
Page 34: Ec Declaration Of Conformity
EN 55014-1:2009 EN 55014-2/A2:2008 EN 61000-3-2/A2:2009 EN 61000-3-3:2008 Authorised Signatory and technical file holder Date : 20/07/2013 Signature:_________________ Name / title: Peter Harries / Quality Manager Titan Power Tools (UK) Ltd. Trade House, Mead Avenue, BA22 8RT 240W SCROLL SAW TTB545SSW... - Page 35 Titan Power Tools (UK) Ltd Trade House, Mead Avenue, BA22 8RT...
Need help?
Do you have a question about the TTB545SSW and is the answer not in the manual?
Questions and answers
Hello. I'm looking for a replacement lower pinned blade holder for a Titan scroll saw TTB545SSW. Thanks.