Titan TTB674TAS Instruction Manual page 44

TTB674TAS by TITAN
GB
IE
> Start the saw, and wait for the blade to reach full speed. Do not stand directly in
line with the saw blade's path. Instead, stand on the side where the cut is being
made.
> Keep the work piece against the parallel profile of the mitre gauge and
flat against the table. Slowly push the mitre gauge with the work piece through
the blade.
> Do not attempt to pull the work piece backward while the blade is turning. Turn
the switch OFF, and wait until the blade has come to a complete stop before
carefully sliding the work piece out.
Fig. 30
44
Warning: Risk of injury!
In order to avoid instability, always place the larger surface of the
work piece on the table when crosscutting and/or bevel crosscutting.
Product functions