Compound Miter Crosscutting; Miter Angle - Titan TTB674TAS Instruction Manual

TTB674TAS by TITAN
Bevel crosscutting 0° - 45° blade
bevel & 90° mitre angle
> This operation is the same as crosscutting, except that the blade is at a bevel
angle other than 0°.
> Adjust the blade to the desired angle, and then tighten the blade bevel locking
handle.
> Tighten the mitre gauge locking handle at 90°.
> Hold the work piece firmly against the parallel profile of the mitre gauge
throughout the cutting operation.
Fig. 31

Compound miter crosscutting

0° - 45° blade bevel & 0° - 45°

miter angle

> This sawing operation combines a miter angle with a bevel angle.
Product functions
GB
IE
45