Product Functions - Titan TTB674TAS Instruction Manual

TTB674TAS by TITAN
Height adjusting handle
> The height adjusting handle [6] is used to raise and lower the blade. Turn
clockwise to lower the blade and anticlockwise to raise it. (Fig. 25)
The cut height of the saw blade must be adjusted to the height of the work piece:
The saw blade must always be lowered onto the work piece.
NOTE: In order to be able to use the complete adjustment range
of 45°, the cut height must be reduced accordingly.
Warning: Risk of injury!
Body parts or objects which are in the adjustment area can be
caught by the running saw blade! Only adjust the cut height when
the saw blade is standing still!
NOTE: To balance out possible play in the cut height adjustment,
always move the saw blade into the desired position from below.
Rip fence
> This fence is used for all ripping operations. Never rip freehand without the fence
in place and securely locked.
Adjust the distance of the rip fence
> Pull the rip fence locking handle [22] up.
> Slide the rip fence [19] to the required position. The set position can be read
off using the scale.
> Push the rip fence locking handle [22] down.

Product functions

GB
IE
37