Feeding Roll Paper Manually; Keeping Track Of The Amount Of Roll Paper Left - Canon iPF825 User Manual

Feeding Roll Paper Manually

When the printer is offline, you can advance or retract the roll on the Platen by pressing ▲ or ▼.
1.
Press the Online button to bring the printer offline.
2.
Confirm that a roll is selected as the paper source. (See "Selecting the Paper Source.")
3.
Press the ▲ or ▼ button to advance or retract the roll.
Press ▲ to retract the roll manually.
Press ▼ to advance the roll manually.
Note
• Holding down ▲ or ▼ for less than a second moves the roll about 1 mm (0.04 in).
Holding down ▲ or ▼ for more than a second moves the roll until you release the button. Release the
button when the Display Screen indicates "End of paper feed. Cannot feed paper more.".

Keeping Track of the Amount of Roll Paper Left

If you have activated automatic monitoring of the remaining roll paper, when the roll is ejected, a barcode with text is
printed on the roll paper that identifies the type of paper and amount left. When this function is activated and barcodes
are printed on the roll paper, the type of paper and amount left are automatically detected after rolls are loaded. The
barcode will be cut off after it has been read.
Note
• If the document is not cut but kept in the printer, only the text message is printed.
Important
• Because this function is not compatible with clear film, an error message may be displayed ( "The roll is
empty." ) after you load clear film. For this reason, deactivate the function before loading clear film.
• If the barcode on the roll is not detected, enter the type and length of paper on the Control Panel.
iPF825
Handling Paper > Handling rolls
→P.594
Feeding Roll Paper Manually
>
7
603