Canon iPF825 User Manual page 667

Imageprograf large format printer
Hide thumbs Also See for iPF825:
Table of Contents

Advertisement

d. Message lamp (Orange)
• On
A warning message is displayed.
• Flashing
An error message is displayed.
• Off
The printer is off or is operating normally.
e. Paper Source Section
After you press the Feeder Selection button, the lamp for your chosen paper source is lit.
1. Roll Media lamp (Green)
• On
Indicates that a roll is selected as the paper source.
• Off
Indicates that a sheet is selected as the paper source.
2. Cut Sheet lamp (Green)
• On
Indicates that a sheet is selected as the paper source.
• Off
Indicates that a roll is selected as the paper source.
f. Feeder Selection Button
Switches the paper source. Each time you press this button, the paper source switches between the roll and the
sheet, and the corresponding lamp on the Paper Source Section is lit.
g. Display Screen
Shows the printer menu, as well as the printer status and messages.
h. Color Label
This label indicates the Ink Tank color. The label corresponds to the ink level on the Display Screen.
i. HDD lamp (Green)
• On
Indicates the printer is accessing the hard disk.
• Off
Indicates the printer is not accessing the hard disk.
j. ◀ Button
Menu mode: Press this button to display the menu one level higher.
k. ▲ Button
Offline: Press this button to rewind rolls manually. (See "Feeding Roll Paper Manually.")
Menu mode: Press this button to display the previous menu item or setting value.
l. ▼ Button
Offline mode: Press this button to feed the roll manually in the direction of ejection, as needed. (See "Feeding Roll
Paper Manually.")
→P.603
Menu mode: Press this button to display the next menu item or setting value.
m. ▶ Button
Menu mode: Press this button to display the menu one level lower.
iPF825
Printer Parts
>
Control Panel
→P.603
Control Panel
>
9
651

Advertisement

Table of Contents
loading

Table of Contents