Canon iPF825 User Manual page 777

14.
While firmly holding the Printhead you have removed, use your other hand to remove the orange Safety Cap 1
(a). Squeeze the grips (c) of Safety Cap 2 (b) and pull it down to remove it.
Important
• The inside surfaces of Safety Cap 1 (a) and Safety Cap 2 (b) are coated with ink to protect the
nozzles. Be careful not to touch these surfaces when removing the caps.
• Never touch the ink supply section (d). This may cause printing problems.
• The Printhead contains ink to protect the nozzles. We recommend removing Safety Cap 2 (b) as
you hold it over the Printhead package or safely out of the way to avoid spilling ink and staining
your clothes or the surrounding area. If ink accidentally spills, wipe off the ink with a dry cloth.
• Do not reattach the Safety Cap or protective material. Dispose of these materials in accordance
with local regulations.
15.
With the nozzles facing down and the metal contacts toward the back, insert the Printhead into the Carriage.
Carefully push the printhead firmly into the Carriage, ensuring that the nozzles and metal contacts do not touch
the carriage.
16.
Pull the Printhead Fixer Cover down toward the front to lock the Printhead in place.
iPF825
Maintenance > Printheads >
Replacing the Printhead
11
761