Printing Does Not Start - Canon iPF825 User Manual

Printing does not start

The Data lamp on the Control Panel does not light up ............................................................................. 797
The printer does not respond even if print jobs are sent ........................................................................... 797
Ink Filling.. is displayed ............................................................................................................................. 797
The display screen indicates Agitating ...................................................................................................... 797
The Data lamp on the Control Panel does not light up
Cause
The printer is not on.
The target printer was not selec-
ted when printing. (The printer
is in Sleep mode.)
The print job is paused. (The
printer is in Sleep mode.)
The printer does not respond even if print jobs are sent
Cause
The printer is offline.
You have printed when select Save in mail
box is selected in Output Method.
Ink Filling.. is displayed
Cause
The printer was forced off during op-
eration.
The display screen indicates Agitating
Cause
Ink agitation is in
progress.
iPF825
Make sure the power cord is securely plugged in, all the way. Press the Power
button to turn on the printer.
In Windows, select the printer by clicking Select Printer or Printer in the print-
ing dialog box and try printing again.
In Mac OS X, open the dialog box of the printer driver, select the printer from
the list of Printer, and try printing again.
In Windows, restart the print job as follows.
1. Select the printer icon in the Printers and Faxes (or Printers ) window.
2. Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1. Click Print & Fax. (This is identified as Printer Setup Utility or Print Cen-
ter in other versions of Mac OS X.)
2. Select the printer, and then Resume Printer (or Start Jobs ) in the Printers
menu to restart the print job.
Press the Online button on the Control Panel to bring the printer
online.
Print the job saved on the printer's hard disk.
(See "Printing Saved Jobs.")
Wait until the system has been filled with ink. This process may take
about ten minutes.
The time for agitation varies depending on how long the printer has been turned off. (Be-
tween about a minute and a half to twenty minutes.) During agitation, you can print or do
other operations after the printer goes Online.
Troubleshooting
Corrective Action
Corrective Action
→P.538
Corrective Action
Corrective Action
The Data lamp on the Control Panel does not light up
> Printing does not start >
12
797