Canon iPF825 User Manual page 623

Paper Choose this option if you want to cut pages by
Cut- pressing Cutter Unit buttons for manual cut-
ting ting after printing when the printer driver is
configured to Auto Cut > No or Print Cut
→P.610
Guideline.
Otherwise choose this option if you want to
cut the roll edge after loading a roll.
Note
• Automatic and Eject are valid only when you have specified Auto Cut > Yes in the printer driver.
• With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is
cut.
Cut rolls manually in the following cases:
Eject (waiting for ink to dry after printing)
Important
• When cutting wide printed documents after ejection, have two people support the documents. If the pa-
per drops, printed documents may be damaged.
• Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the
printing quality.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Paper Details, and then press the ▶ button.
3.
Press ▲ or ▼ to select the type of paper, and then press the ▶ button.
4.
Press ▲ or ▼ to select Cutting Mode, and then press the ▶ button.
iPF825
Cutting Method
Handling Paper
Menu Settings
Auto Cut
Paper Yes
Cutting
Specifying the Cutting Method for Rolls
> Handling rolls >
Driver Setting
No Print
Cut
Guideline
7
607