Canon iPF825 User Manual page 601

Important
• Cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may cause feeding
problems and affect the printing quality. Be careful not to cut through any barcodes printed on the roll.
• Align the edges of the paper on both ends of the roll. This may cause feeding problems.
Caution
• Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a
roll may cause injury.
Note
• For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See
"Paper Sizes.")
• After pressing the Load/Eject button, you can refer to instructions on the Display Screen as you load the
paper.
1.
Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at the position
indicated (b), remove it from the Roll Holder.
iPF825
(See "Types of Paper.")
→P.581
Handling Paper
→P.578
Attaching the Roll Holder to Rolls
> Handling rolls >
7
585