Canon iPF825 User Manual page 773

Important
• There may be ink around the nozzles of the Printhead you remove. Handle the Printhead carefully during
replacement. The ink may stain clothing.
• Do not open the Printhead pouch until immediately before installation. After removing the Printhead
from the pouch, install it right away. If the Printhead is left after the pouch is opened, the nozzles may
dry out, which may affect printing quality.
• If you need to put a Printhead somewhere temporarily before installation, do not keep the nozzles and
metal contacts
printing quality.
Replacing the Printhead
Caution
• When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The
metal parts of the Printhead become hot during printing, and there is a risk of burns from touching these
parts.
Note
• Prepare a new Ink Tank when ink levels are low.
• Your hands may become dirty during Printhead replacement. Use the gloves provided with the new
Printhead for replacement.
• Choose On in Auto Print to have the printer automatically adjust the Printhead alignment after replace-
ment of the Printhead. (See "Main Menu Settings.")
1.
If the roll is not ejected because of the cutting method selected, cut it manually and remove it. (See "Cutting
Roll Paper After Printing.")
2.
Clean inside the Top Cover. (See "Cleaning Inside the Top Cover.")
3.
Press the Menu button to display MAIN MENU.
4.
Press ▲ or ▼ to select Maintenance, and then press the ▶ button.
5.
Press ▲ or ▼ to select Replace P.head, and then press the ▶ button.
6.
Press ▲ or ▼ to select Yes, and then press the OK button.
Ink is now filled.
After about two minutes, a message is shown on the Display Screen instructing you to open the Top Cover.
iPF825
facing down. If the nozzles or metal contacts are damaged, it may affect the
→P.760
→P.184
Maintenance
→P.679
→P.772
> Printheads >
Replacing the Printhead
11
757