Adjusting The Feed Amount - Canon iPF825 User Manual

Adjusting the feed amount

Adjusting the Feed Amount ....................................................................................................................... 635
Selecting a Feed Amount Adjustment Method (Feed Priority) .............................................................. 635
Auto Band Adjustment (Auto Band Adj.) ............................................................................................... 636
Manual Band Adjustment (Manual Band Adj) ....................................................................................... 637
Banding Adjustment During Printing (Fine Band Adj.) .......................................................................... 639
Adjusting Line Length (Adjust Length) .................................................................................................. 640
Adjusting the Vacuum Strength (VacuumStrngth) ..................................................................................... 642
Adjusting the Feed Amount
If printed documents are affected by the following problems, try adjusting the feed amount.
• Banding in different colors
• Line length is not accurate in the direction paper is fed
To adjust the feed amount, do the following, in this order.
1.
Depending on the issue, change the Feed Priority setting for the particular type of paper. (See "Selecting a
Feed Amount Adjustment Method (Feed Priority).")
2.
Based on the Feed Priority setting, use Auto Band Adj., Manual Band Adj, or Adjust Length. (See "Auto
Band Adjustment (Auto Band Adj.).")
(See "Adjusting Line Length (Adjust Length).")
→P.637
3.
If additional fine-tuning is necessary after Auto Band Adj. or Manual Band Adj, use Fine Band Adj. in the
Menu Durng Prtng. (See "Banding Adjustment During Printing (Fine Band Adj.).")
Selecting a Feed Amount Adjustment Method (Feed Priority)
Methods of adjusting the amount paper is fed are set for each type of paper, in the Feed Priority setting.
Adjust the Feed Priority setting to suit your particular printing application.
• Band Joint : Adjusts the feed amount to reduce banding across the sheet in printed documents.
The settings of Auto Band Adj. or Manual Band Adj are applied. If you have executed Fine Band Adj., in addi-
tion to the settings of Auto Band Adj. or Manual Band Adj, the settings of Fine Band Adj. are also applied.
• Print Length : Adjusts the feed amount for better accuracy of lines in printed documents.
The settings of A:High or B:Standard/Draft in the Adjust Length menu are applied.
• Automatic : Band Joint or Print Length is selected, depending on Print Priority as selected in the printer driver
at the time of printing.
Image or Office Document : Band Joint is selected.
Line Drawing/Text : Print Length is selected.
Note
• Use Manual Band Adj for transparent media or other paper for which adjustment with Auto Band Adj.
is not possible.
• Either B:Standard/Draft or A:High in the Adjust Length menu is applied, depending on printer driver
settings at the time of printing.
• If you have selected Easy Settings in the printer driver, follow these steps to confirm the Print Priority
setting.
• Windows: Click View Settings on the Main tab to display the View Settings dialog box.
• Mac OS X: Click View set. on the Main pane to display the View settings dialog box.
iPF825
Adjustments for Better Print Quality
→P.635
(See "Manual Band Adjustment (Manual Band Adj).")
→P.636
→P.640
> Adjusting the feed amount
→P.639
Adjusting the Feed Amount
>
8
635