Roll X Is Empty. (X Is 1 (Upper) Or 2 (Lower)) - Canon iPF825 User Manual

Error Message >

Roll x is empty. (x is 1 (Upper) or 2 (Lower))

"Lift the release lever and replace the roll."
The roll is empty.
There is remaining roll paper, but because it could not be
advanced, it could not be detected.
13
828
Roll x is empty. (x is 1 (Upper) or 2 (Lower))
Messages regarding paper >
Cause Corrective Action
Follow these steps to replace the used roll with a new
roll of the same type and size.
1. Lift the Release Lever and remove the roll.
(See "Removing the Roll from the Printer.")
→P.597
(See "Removing the Roll Holder from Rolls.")
→P.601
2. Load the new roll.
(See "Attaching the Roll Holder to Rolls.")
→P.584
(See "Loading Rolls in the Printer.")
3. If no barcode was printed on the roll, specify the
type of paper.
(See "Selecting the Paper Type (Roll).")
→P.595
4. If no barcode was printed on the roll, specify the
paper length.
(See "Specifying the Paper Length (Roll).")
→P.596
5. If "Not finished printing. Finish printing remain-
ing jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on
which the error occurred.
Choose a higher level of Print Quality in the Ad-
vanced Settings of the printer driver and try printing
again.
(See "Giving Priority to Particular Graphic Elements
and Colors for Printing.")
→P.53
→P.588
iPF825