Hp-Gl/2 Jobs Are Printed 6 Mm Larger Than Specified - Canon iPF825 User Manual

Troubleshooting

HP-GL/2 jobs are printed 6 mm larger than specified

The page size of the HP-GL/2 print job, as created in the source
application, is incorrect.
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
The page size of the HP-GL/2 print job, as
created in the source application, is incor-
rect.
HP-GL/2 printing takes a long time.
Large print jobs with a lot of data take longer to
print.
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
The printer is analyzing the
print job.
12
814
HP-GL/2 jobs are printed 6 mm larger than specified
> HP-GL/2 problems >
Cause
Cause
Cause
Cause
Either wait a while for printing to resume, or on the printer Control Panel, set Input
Resolution to 300dpi.
(See "Main Menu Settings.")
In MAIN MENU, set PageSizeProcess1 to On.
(See "Main Menu Settings.")
Corrective Action
In MAIN MENU, set PageSizeProcess2 or Conserve Paper to
On.
The layout will be changed to the optimal layout.
(See "Main Menu Settings.")
Corrective Action
On the printer Control Panel, set Input Resolution to 300dpi.
(See "Main Menu Settings.")
Corrective Action
→P.679
Corrective Action
→P.679
→P.679
→P.679
iPF825