Graphics Settings
You can perform the graphics settings.
Vector Graphics settings
Use these settings to adjust the print mode and resolution.
1.
Click the Vector Graphics below Graphics.
The Device and Document Settings sheet opens and switches to the Vector Graphics settings.
2.
Select Color or Monochrome.
3.
Select a setting for Color Depth from the list.
Color Depth presents the following items for selection.
Setting
Color
Monochrome
4.
Move the Res slider to adjust the settings.
Res presents the following items for selection.
Setting
300 DPI
600 DPI
iPF825
16777216 ( 24-bit) colors
16777216-Level grayscale
Due to this low resolution, the image will print faster but its texture will appear
rough.
This high resolution will achieve the best results.
Windows Software
Details
Details
Graphics Settings
>
HDI Driver
>
4
353