The Printer Stops During A Print Job - Canon iPF825 User Manual

Imageprograf large format printer
Hide thumbs Also See for iPF825:
Table of Contents

Advertisement

Troubleshooting

The printer stops during a print job

An error message is shown on the Display Screen ................................................................................... 798
The printer ejects blank, unprinted paper .................................................................................................. 798
An error message is shown on the Display Screen
An error message is displayed during printing.
The last portion of roll paper was used during a print
job, and paper could not be advanced because the trail-
ing edge is taped to the roll.
The printer ejects blank, unprinted paper
The leading edge of the roll pa-
per was cut to straighten it.
The Printhead nozzles are clog-
ged.
12
A print job was received from an
incompatible printer driver.
The printer has received print da-
ta that includes HP RTL com-
mands when Auto Rotate is On.
The printer is damaged.
798
An error message is shown on the Display Screen
>
The printer stops during a print job
Status
Status
This operation is normal.
The printer cuts the leading edge of the roll to straighten it and ejects the scraps
when Trim Edge First in the printer menu is On or when Trim Edge First is
Automatic and the leading edge is slanted. The printer is ready to print after
this initial preparation.
When Off is selected under Trim Edge First, the edge is not cut and scraps are
not removed.
Print a test pattern to check the nozzles and make sure the Printhead is in good
condition for printing.
(See "Checking for Nozzle Clogging.")
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
Use the correct imagePROGRAF printer driver for the printer and try printing
again.
Set Auto Rotate to Off before attempting to print again.
(See "Main Menu Settings.")
Contact your Canon dealer for assistance.
>
Corrective Action
Check the error message and take action as necessary.
(See " Error Messages
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
(See "Loading and Printing on Rolls.")
Corrective Action
→P.755
→P.679
.")
→P.821
→P.597
→P.601
→P.3
→P.754
iPF825

Advertisement

Table of Contents
loading

Table of Contents