Configuring The Ip Address Using The Printer Control Panel - Canon iPF825 User Manual

Important
• If you use a DHCP server for automatic assignment of the printer's IP address, printing may no longer be
possible after the printer is turned off and on. This is because an IP address different from before has
been assigned. Thus, when using DHCP server functions, consult your network administrator and config-
ure the settings in one of the following ways.
• Configure the setting for dynamic DNS updating
In RemoteUI, activate the setting Enable DNS Dynamic Update. (See "Configuring the Printer's
TCP/IP Network Settings.")
• Configure the setting for assignment of the same IP address each time the printer starts up
Note
• We recommend configuring the printer's IP address even if you will use the printer in networks other
than TCP/IP networks. Configuring the printer's IP address enables you to use RemoteUI to configure
the network settings and manage the printer with a web browser.
For details on RemoteUI, see "Using RemoteUI."

Configuring the IP Address Using the Printer Control Panel

This topic describes how to configure the printer's IP address on the Control Panel.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Interface Setup, and then press the ▶ button.
3.
Press ▲ or ▼ to select TCP/IP, and then press the ▶ button.
4.
Press ▲ or ▼ to select IP Setting, and then press the ▶ button.
5.
Press ▲ or ▼ to select IP Address, and then press the ▶ button.
6.
After you press ◀ or ▶ to select the input field, numerical input is possible.
7.
Press the ▲ or ▼ button to enter the value.
Note
• Pressing the ▲ button increases the number by 1. The maximum value is 255, after which 0 is
displayed.
• Pressing the ▼ button decreases the number by 1. The minimum value is 0, after which 255 is
displayed.
• Hold down ▲ or ▼ to increase or decrease the value continuously.
8.
Repeat steps 6–7 to enter the IP address assigned to the printer.
iPF825
→P.717
→P.717
Configuring the IP Address Using the Printer Control Panel
Network Setting > Network Setting >
10
715