Adjusting Line Length (Adjust Length) - Canon iPF825 User Manual

Adjustments for Better Print Quality
6.
Press the Online button to resume printing.

Adjusting Line Length (Adjust Length)

Use Adjust Length to ensure that lines in CAD drawings are printed at exactly the right length.
In the Adjust Length menu, choose the mode of length adjustment ( A:High or B:Standard/Draft ) that suits your
particular printing application.
• A:High : This setting is applied when Highest or High is selected in Print Quality in the printer driver.
• B:Standard/Draft : This setting is applied when Standard or Draft is selected in Print Quality in the printer
driver.
Check the Feed Priority setting before using Adjust Length. (See "Selecting a Feed Amount Adjustment Method
(Feed Priority).")
Note
8
• Use paper of the same type and size for adjustment as you will use for printing.
• If you have selected Easy Settings on the printer, follow these steps to confirm the Print Quality set-
ting.
• Windows: Click View Settings on the Main tab to display the View Settings dialog box.
• Mac OS X: Click View set. on the Main pane to display the View settings dialog box.
Paper to Prepare
Rolls
Sheets
Follow these steps to change the Adjust Length setting.
1.
Load paper.
• Attaching the Roll Holder to Rolls
• Loading Rolls in the Printer
640
• Loading Sheets in the Printer
Adjusting Line Length (Adjust Length)
> Adjusting the feed amount
→P.635
An unused roll at least 10 inches wide
One sheet of unused paper of at least A4/Letter size
→P.588
Note
• Always make sure the loaded paper matches the type of paper specified in the settings. Adjust-
ment cannot be completed correctly unless the loaded paper matches the settings.
>
→P.584
→P.616
iPF825