Advanced Security - TP-Link TL-WR841HP User Manual

gateway to support address and port translation for certain application layer "control/data"
protocols such as FTP, TFTP, H323 etc.
 FTP ALG - To allow FTP clients and servers to transfer data across NAT, click
Enable.
 TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, click
Enable.
 H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT, click
Enable.
 RTSP ALG - To allow some media player clients to communicate with some
streaming media servers across NAT, click Enable.
SIP ALG - To allow some multimedia clients to communicate across NAT, click

Enable.
Click the Save button to save your settings.

3.4.8.2. Advanced Security

Go to "Advanced→Security→Advanced Security", and then you can protect the router from
being attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood in this page.

Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5
and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates
TL-WR841HP 300Mbps High Power Wireless N Router
-57-