TP-Link TL-WR841HP User Manual page 167

2) Some ISPs require that you register the MAC Address of your adapter, which is
connected to your cable/DSL Modem during installation. If your ISP requires MAC
register, login to the router and Go to "Advanced→Network→WAC Clone". On the
"MAC Clone" page, if your PC's MAC address is proper MAC address, click the "Clone
MAC Address" button and your PC's MAC address will fill in the "WAN MAC Address"
field. Or else, type the MAC Address into the "WAN MAC Address" field. The format for
the MAC Address is XX-XX-XX-XX-XX-XX. Then click the "Save" button. It will take
effect after rebooting.
3. I want to use Netmeeting, what do I need to do?
If you start Netmeeting as a host, you don't need to do anything with the router.
1)
2) If you start as a response, you need to configure Virtual Server or DMZ Host and make
sure the H323 ALG is enabled.
How to configure Virtual Server: Log in to the router, Go to "Advanced→Forwarding
3)
→Virtual Servers". On the "Virtual Servers" page, click Add New.... Then on the
"Add or Modify a Virtual Server Entry" page, enter "1720" for the "Service Port"
blank, and your IP address for the "IP Address" blank, taking 192.168.0.169 for an
example, remember to Enable and Save.
TL-WR841HP 300Mbps High Power Wireless N Router
-158-