TP-Link TL-WR841HP User Manual page 114

There is one submenu under the Network menu: LAN. Click it, and you will be able to configure
the corresponding function.
4.3.2.1. LAN
Go to "Setting→Network→LAN", and then you can configure the IP parameters of LAN on this
page.

MAC Address - The physical address of the LAN ports, as seen from the LAN. The value
can NOT be changed.

Type - Choosing Smart IP to get IP address from DHCP server, or choosing static IP to
configure IP address manually.

IP Address - If you have chosen the type of Static IP. You can set a new IP address of your
system here in dotted-decimal notation (factory default - 192.168.0.1).

Subnet Mask - An address code that determines the size of the network. Normally
255.255.255.0 is used as the subnet mask.

Gateway - The gateway should be in the same subnet as your IP address.
Click the Save button to save your settings.

Note:
 If you change the IP address, you must use the new IP address to login the system.

If you select the type of Smart IP, the DHCP server in this device will not startup.

If the new IP address you set is not in the same subnet, the IP Address pool in the DHCP
server will not take effect, until they are re-configured.

This device will reboot automatically after you click the Save button.
TL-WR841HP 300Mbps High Power Wireless N Router
-105-