TP-Link TL-WR841HP User Manual page 95

Static IPv6
 IPv6 Address - Enter the IPv6 address in dotted-decimal notation provided by your ISP.
 Default Gateway - Enter the default gateway in dotted-decimal notation provided by your
ISP.
 MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely
required, and should not be done unless you are sure it is necessary for your ISP
connection.
 Primary DNS - Enter the DNS IPv6 address in dotted-decimal notation provided by your
ISP.
 Secondary DNS - Enter another DNS IPv6 address in dotted-decimal notation provided by
your ISP.

Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get DNS server addresses.

Address Autoconfiguration Type - RADVD (Router Advertisement Daemon) and
DHCPv6 (Dynamic Host Configuration Protocol for IPv6) Server.

Site Prefix/ Site Prefix Length: - Configure the Site Prefix and Site Prefix Length. Please
TL-WR841HP 300Mbps High Power Wireless N Router
-86-